When the Standby switch is OFF | Nikon 58-104 specs

When the Standby switch is OFF. ..

When using the S8-104 with the Nikonos RS or V, if the S8-104 's power switch is turned ON , the power required for one manual full flash output is consumed in about 10 minutes without the flash being fired . The battery will thus be used up in about 20 hours without the flash being fired unless the standby switch is turned ON .

- Caution

e The standby function does not work in Flash Slave mode.

e The standby function does not work with the Nikonos IV-A. Turn OFF the standby switch.

+Note

A fully-charged, fresh NiCd battery can be used in the standby mode for about 60 days while setting the function selector to ~ (standard) mode, and about 30 days while it is set to [0] (cordless remote flash) mode (at 20 ° C, no flashes fired).

I If the Speedlight will not be used for a long period of time, be sure the power switch is OFF before storing.

38

Image 38

Nikon 58-104 manual When the Standby switch is OFF

Contents

·58-104 Foreword Switch · Speedlight Parts Battery chamber Buckle hook Sync cord Standard bracket Main Features Details on Details on the SpeedlightsParts Preparations for Taking PicturesBasic Shooting Basic Applications Other Items Tips on Speedlight Care Be sure to take trial shots first Ring areas to check Checking O-ringsBe sure to check the O-rings before use Removing and Reseating O-rings +Note Reseat the O-ring into their 4channelsPage Page 6Lock the releasellock buckle Open the battery chamber cap by 3lifting it up5Raise the buckle Connecting the S8-104 to the Camera and Making Settings 4Remove the sync socket cap on the camera 10Insert the arm Cord fastening hanger ~ ~rJ~ OFFo ~ Test firing Function SelectorStandard flash photography Camera Slave cordless remote photography ~ ~6~ Page Basic Flash Photography with the Nikonos RS 2Set the camerassync mode to any desired mode ~ ~rlQ 6Set the focus mode on the Nikonos RS to S or C Set exposure mode to aperture Priority auto exposure a ~~~~~~h~~~~ Pressing the shutter release button slightlyPage TTL AI! SOrS.b Possible Shooting Modes wHh the S8-104 and Nikonos 1000500 250 30 ~ OFF Do not let water get into the sockets Caring for the 88-104 After UseWash the Speedlight with fresh water Drying the Speedlight Be sure that all water has been removed Also dry the battery chamberIf switch or selector movements become rough Disconnect the sync cord from the socket and attach the capPage When the Standby switch is on Standby Swnch When the Standby switch is OFF +Note Alert SignalReady-light blinks Moisture alert light blinks Heat alert light blinks Distance scale chart Aperture scale chart TTL flash mode When taking pictures with the arm removed from the bracket Manual flash mode 4, and M 1/16 Guide number at various film speed Light OutputPage Role of the Speedlight Taking photographs highlighting the blue of the sea When shooting brightly shining fish When sand has been stirred up in the water ~I\ .~ ~ JeJtfj oom·i Flash Slave ~·i Release the shutter on the camera Rear-Curtain Sync Photography OFF0l!i2J Set the f/stop and shutter speed on 3the camera Using the Flash Signal Function ··ePage Optional Accessories Extension Arm SK·104EPage Using the SK·104C arm for the S8·102 and S8·103 Arm 5K·104C for 5peedlights 58·102, 58·103 Using the SK·104W Double Bracket Double Bracket SK·104W Double Sync Cord SC·100 ·Ring and Screw Set NiCd Battery Unit SN·104Quick Charger SH·104 Details on NiCd Battery Unit SN-104 When recharging the SN·104 battery pack Tips on carrying and storing the SN·104 Do not jump into the water while holding the Speedlight Tips on 88-104 CareDo not subject the Speedlight to vibrations or shock Do not subject the Speedlight to excessive heat If the Speedlight gets soiled Never disassemble the Speedlight 58·104 Test fire the 5peedlight about once a month Safekeeping the S8·104 Remove the NiCd batteryWhen storing the 58·104 Specifications Page Nikon Correccion CorrectionBerichtigung Jjtojj 5fjT jE l I.L1-to