Nikon 58-104 manual Flash Slave

Flash Slave

The 8B-104 can be used as a flash slave without releasing the camera 's

shutter. When it senses the light	I\
from a master flash , it fires simulta-
neously, providing additional light for	\
exposing the photograph . Because	\v
these 8peedlights are not connected	/ \

by a cord, more than two can be ~\ used to create special lighting

effects.

./~¥

. /;7

. /

/ /

/

/

I

II]

• Important

An S8-104, S8-101 , S8-102, or S8-103 can be used as a flash activating unit.

1Set the function selector on the slave unit to [IJ "flash slave" mode.

I

-When the power switch is ON, you cannot set the function selector switch. Turn OFF the power switch.

2Set the flash mode selector on the slave unit to either "M Full," "M 1/4," or "M 1/16." (Manual)

Set the output to the desired flash power as a fill-in light.

Determine the correct flash output from the camera'saperture value and the distance between the subject and the Speedlight.

o

~.Q

OFFol

50