3Turn ON the 88-104's power switch , and check to be sure that the ready- light is lit.

4The shutter is released each time another speedlight fires, and the

88-104 mounted on the camera also fires at the preset mode.

e Caution

oL..rtJ nil" .,

~ (JeJtfj) oom·i

...FULl "M4 ",1/ 16 _

~ .. iJ6D~ OFFOlJiV

If there are other people in the area firing a speedlight, it may cause your Speedlight to fire also.

+Notes

. It is recommended that you use a tripod for this operation unless you

I

have someone to assist by holding the slave SB·104 and Nikonos RS.

• Underwater Camera Slave (cordless remote photography) when

another speedlight (activating a shutter release operation) and the

SB-104 are facing each other is possible within a distance of 10 meters

(32.8 feet).

 

• If the flash from the other speedlight (activating shutter release

 

operation) is not detected by the sensor on the SB·104, the SB·104 may

 

not fire. Check to be sure the flash fires properly before using it.

 

• Battery power consumption of the SB·104when set for cordless remote

 

operation is as follows:

 

With standby switch ON : Equivalent power required for one manual full

 

output is consumed in approximately six hours.

 

With standby switch OFF: Equivalent power required for one manual

 

full output is consumed in approximately 10 minutes.

 

49

Page 49
Image 49
Nikon 58-104 manual ~ JeJtfj oom·i