Nikon 58-104 manual Be sure that all water has been removed, Also dry the battery chamber

Be sure that all water has been removed . ..

Several days are required for all water to dry from below the rubber cover. Keep in mind that water may still remain in hard-to-reach areas even after the surface has dried .

Disconnect the sync cord from the socket and attach the cap . . .

Salt and other foreign matter will remain on the sync cord and the socket if the cord is not disconnected. After washing and drying the Speedlight, remove the plug and remove all the salt. After that, it is a good idea to apply a small amount of O-ring lubricant to the screw threads. Be sure always to attach the socket cap to prevent water or dirt from getting into the socket.

Also dry the battery chamber . . .

After drying the main body, open the battery chamber, remove the battery, and let the inside of the chamber dry completely before closing it again.

If switch or selector movements become rough . . .

Tiny particles of sand getting inside the panel may affect smooth operation of the power switch or selector. In this event, remove the four screws (as illustrated), open the panel, and rinse out the sand. Reassemble the panel after letting the inside dry completely. If a screw is lost, use a spare screw provided.

35