Connecting the Camera to a Printer (Direct Print)
Printing Individual Images
After connecting the camera to the printer correctly (E22), print pictures by following the procedure below.
1 Use the multi selector to choose the picture to |
|
Print selection | |
be printed, and press the kbutton. |
|
• Operate the zoom control toward f(h) to display 6 thumbnails, or toward g(i) to switch back to full- frame playback mode.
2 Set the number of copies and paper size.
•Choose Copies and press the kbutton to set the number of copies (up to 9).
•Choose Paper size and press the kbutton to set the paper size (E26).
To prioritize the printer settings, select Default.
PictBridge
1 prints
Start print
Copies
Paper size
3 Choose Start print and press the kbutton. | PictBridge |
4 prints
Start print
Copies
Paper size
4 Printing starts.
•The monitor display returns to that shown in step 1 when printing is complete.
•When printing is complete, turn the camera off and then disconnect the USB cable.
Printing
2 / 4
Cancel
Current print/total number of prints
Section Reference
E23