Nikon AW110, AW110 Orange manual 230

Troubleshooting

	Problem	Cause/Solution	A
		• If the camera clock has not been set (“Date not set” indicator	22, 94,
		flashes during shooting), still pictures have a time stamp of	E69
	Date and time of	“00/00/0000 00:00”; and movies are dated “01/01/2013 00:00.”
		Set the correct date and time using Time zone and date in
	recording are not
		the setup menu.
	correct.
		• The camera clock is not as accurate as a normal clock, such as	94,
		watches. Check camera clock regularly against more accurate	E69
		timepieces and reset as required.
	No information	Hide info is selected for Photo info under Monitor settings in
	displayed in		E71
	monitor.	the setup menu.
	Print date not	Time zone and date in the setup menu has not been set.	22, 94,
	available.		E69
	Date not	• A shooting mode that does not support print date is selected.
	appearing on		94, E73
	pictures even	• Another function that is set now is restricting the print date.	60
	when Print date is	• The date cannot be imprinted onto a movie.	–
	enabled.
	Screen for setting
	time zone and
	date is displayed	Clock battery is exhausted; all settings were restored to their
	when camera is		23
		default values.
	turned on.
	Camera settings
	reset.
	Monitor is turned	Battery temperature is high. Turn off camera, and allow battery to
	off, and the power-	cool down before resuming use. After the lamp flashes for 3	21
	on lamp flashes	minutes, the camera turns off automatically, but you can also
	quickly.	press the power switch to turn it off manually.
		When functions such as movie recording or sending images
	Camera	using an Eye-Fi card are used for a long time, or when the camera	79
IndexandNotesTechnical	temperature rises.	is used in a location with a high ambient temperature, the
		camera temperature may rise. This is not a malfunction.

F10