GPS Options Menu
4 When log recording is completed, use the multi selector to end the log that was selected in step 1 using Create log of the GPS options menu, and press the kbutton.
Create log
Start all logs End all logs Start GPS log End GPS log Start depth log End depth log
5 Select Save logs, and press the kbutton. |
|
|
| End all logs | |
|
| |
• The log data is saved to a memory card. |
|
|
|
| Save logs |
|
| Erase logs |
|
|
|
BNotes on Log Recording
•If the date and time are not set, the log cannot be recorded.
•Use a fully charged battery to prevent the camera from turning off during log recording. When the battery power becomes exhausted, log recording ends.
While the altitude log or water depth log is recorded, the battery is exhausted much faster. Exercise caution regarding the remaining battery level.
•Log recording ends due to the operations below even when there is time remaining for log recording.
-The battery is removed
-Record GPS data in GPS options is set to Off when the GPS log is recorded
-Reset all in the setup menu is performed
-The setting of the internal clock (time zone or date and time) is changed
•Log recording is paused during the operations below.
-During continuous shooting
-During movie recording
-When connected with a USB cable or HDMI cable
•Even when the camera is turned off, log recording is continuously performed until the preset time has elapsed if there is still time remaining for log recording.
•The log data is temporarily stored in the camera. New logs cannot be recorded if the log data remains in the camera. After recording log data, save it to a memory card.
•See “Log Data Saved on Memory Cards” (E95) for more information.
CTo Erase Log Data
•To erase the log data that is temporarily stored in the camera, select Erase log in step 5.
•To erase the log data that is stored on the memory card, press the lbutton in View log (E64).
Section Reference
E63