Features Shooting
Features That Can Be Set Using the Multi Selector
Using the Flash (Flash Modes)You can set a flash mode that suits the shooting conditions.
1 Press H(mflash mode) on the multi selector.
2 Press the multi selector to select the desired |
| |
Auto | ||
| ||
mode and press the kbutton. |
|
• See “Available Flash Modes” (A51) for more information.
• If the kbutton is not pressed within a few seconds, the selection will be canceled.
•When U(auto) is applied, Dis only displayed for
a few seconds regardless of Photo info settings (A94).
3 Frame the subject and shoot.
• The flash lamp indicates the status of the flash when you press the
- On: The flash will fire when you press the shutter- release button all the way.
- Flashing: The flash is charging. The camera cannot take pictures.
- Off: The flash will not fire when a picture is taken.
•If the battery is low, the monitor will be turned off while the flash is charging.
CEffective Range of the Flash
The flash has a range of about 0.5 to 5.2 m (1 ft 8 in. to 17 ft) for
50