GPS Options Menu
Create Log (Record the Log of Moving Information)
Press the dbutton Mz(GPS options) menu icon (A8) MCreate log
When log recording starts, the measured moving information is recorded until a preset time has elapsed at the interval set for Log interval.
•The recorded log data cannot be used by itself. To use the data, end log recording and save it to a memory card.
1 Use the multi selector to select a log to be recorded, and press the kbutton.
•Select a log to be recorded from the following logs.
-Start all logs: The position information, altitude and water depth information log data is recorded.
-Start GPS log: The position information log data is recorded.
Create log
Start all logs End all logs Start GPS log End GPS log Start depth log End depth log
- Start depth log: The water depth information log data is recorded.
2 Select the log interval that will be used for recording a log, and press the kbutton.
•The intervals that can be set for recording a log vary depending on the log to be recorded.
Log interval
15s
30s
1 min
3 min
5 min
10min
Section Reference
3 Select the duration that the log will be recorded, and press the kbutton.
•Log recording starts.
•The log data is recorded at the interval set for the Log interval until the preset time is reached.
•When Start depth log is selected, the duration for recording the log cannot be selected. The duration for recording the log is fixed at 1 hour.
Start log
Log data for next 6 hrs
Log data for next 12 hrs
Log data for next 24 hrs
Log data for next 72 hrs
Log display (GPS)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 15m | 29m 0s | |||
| 1010hPa | ||||
|
|
|
| 970 | |
|
|
|
|
|
|
Log display (altitude or water depth)
E62