Connecting the Camera to a TV (Viewing Images on a TV)

3 Tune the television to the video channel.

•See the instruction manual provided with your TV for details.

4 Hold down the cbutton to turn on the camera.

• The camera enters playback mode, and the recorded pictures are displayed on the TV.

• While the camera is connected to the TV, the monitor remains off.

BNote on Connecting an HDMI Cable

An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to a TV. The output terminal on this camera is an HDMI micro connector (Type D). When purchasing an HDMI cable, be sure that the device end of the cable is an HDMI micro connector.

BNote on Connecting the Cable

When connecting the cable, be sure that the plug is oriented correctly. Do not force the plug into the camera. When disconnecting the cable, do not pull the plug at an angle.

BWhen Nothing Appears on the TV

Make sure that TV settings (E80) in the setup menu is appropriate for your television.

CUsing the TV’s Remote Control (HDMI Device Control)

The remote control of a TV that conforms to the HDMI-CEC standard can be used to operate the camera during playback.

Instead of the multi selector or zoom control, the remote control can be used for picture selection, playback/pause of movies, switching between full-frame playback and 4-picture thumbnail display, etc.

•Set HDMI device control (E80) of TV settings to On (default setting) in the setup menu, and connect the camera to the TV with an HDMI cable.

•Point the remote control at the TV to operate.

•See your TV’s instruction manual or other related documentation to check whether your TV conforms to the HDMI-CEC standard.

CHDMI and HDMI-CEC

“HDMI” is an abbreviation of High-Definition Multimedia Interface, which is one type of multimedia interface.

“HDMI-CEC” is an abbreviation of HDMI-Consumer Electronics Control, which enables operations to be linked between compatible devices.

Section Reference

E21