
| GPS Options Menu | |
When Altitude/depth logs is selected | 100 | |
| m / time 0 10 20 30 40 50 60 | |
• The altitude information or water depth information is | 80 | |
60 | ||
displayed on the graph. | 40 | |
• When the zoom control is operated toward g(i), a | 20 | |
0 | ||
graph is enlarged. When the zoom control is operated | ||
26/05/2013 [2] 15:30 | ||
toward f(h), the entire graph is displayed. |
|
•To move the graph display, press the multi selector Jor
K.
•When the kbutton is pressed, another image can be selected.
-Press the multi selector Jor Kto select the image.
-To enlarge the image, operate the zoom control toward g(i). To return to the graph display, operate the zoom control toward f(h).
•To erase the displayed log data, press the lbutton.
•The monitor display returns to that shown in step 2 when the dbutton is pressed.
To Erase Log Data
Press the lbutton in step 2 to select either function.
•Selected log: The selected log data is erased.
•All logs: All log data stored on the memory card is erased.
CGPS Log Data
Log data is NMEA
Synchronize
Press the dbutton Mz(GPS options) menu icon (A8) MSynchronize
Signals from the GPS satellites are used to set the date and time of the camera’s internal clock (only when Record GPS data in GPS options of the GPS options menu is set to On). Check the positioning status before starting synchronize.
BNotes on Synchronize
•Date/time adjustment by Synchronize is set according to the time zone set in Time zone and date (A22, E69) of the setup menu. Check the time zone before setting Synchronize.
•The date/time set using Synchronize is not as accurate as radio clocks. Use Time zone and date in the setup menu to set the time if it is not accurate in Synchronize.
Section Reference
E65