Features Shooting

Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

You can set a flash mode that suits the shooting conditions.

1 Press H(mflash mode) on the multi selector.

2 Press the multi selector to select the desired

 

Auto

 

mode and press the kbutton.

 

• See “Available Flash Modes” (A51) for more information.

• If the kbutton is not pressed within a few seconds, the selection will be canceled.

•When U(auto) is applied, Dis only displayed for

a few seconds regardless of Photo info settings (A94).

3 Frame the subject and shoot.

• The flash lamp indicates the status of the flash when you press the shutter-release button halfway.

- On: The flash will fire when you press the shutter- release button all the way.

- Flashing: The flash is charging. The camera cannot take pictures.

- Off: The flash will not fire when a picture is taken.

•If the battery is low, the monitor will be turned off while the flash is charging.

CEffective Range of the Flash

The flash has a range of about 0.5 to 5.2 m (1 ft 8 in. to 17 ft) for wide-angle position, and about 0.5 to 4.5 m (1 ft 8 in. to 14 ft) for telephoto zoom position (when ISO sensitivity is set to Auto).

50