The following table lists the error messages and other warnings displayed on the monitor, as well as the solutions for dealing with them.
Display |
| Cause/Solution | A |
|
|
O | Clock not set. |
|
| ||
(flashes) | Set date and time. |
| |||
|
|
| |||
|
|
|
|
| |
Battery exhausted. | Battery exhausted. |
|
| ||
Charge or replace the battery. |
|
| |||
|
|
|
| ||
|
|
|
|
| |
| Battery temperature is high. |
|
|
| |
Battery temperature | Turn off camera, and allow battery to cool down before |
|
|
| |
resuming use. Five seconds after this message appears, the |
|
|
| ||
is elevated. The | monitor is turned off, and the |
|
| ||
camera will turn off. | quickly. After the lamps flash for three minutes, the camera turns |
|
|
| |
| off automatically, but you can also press the power switch to |
|
|
| |
| turn it off manually. |
|
|
| |
|
|
|
|
| |
The camera will turn | Inside of the camera has become hot. The camera turns off |
|
|
| |
automatically. |
|
|
| ||
off to prevent | – |
| |||
Leave the camera off until the inside of the camera has cooled |
| ||||
overheating. |
|
|
| ||
and then turn it on again. |
|
|
| ||
|
|
|
| ||
|
|
|
|
| |
Q | Camera cannot focus. |
|
|
| |
• | Refocus. |
|
| ||
(flashes red) |
|
| |||
• | Use focus lock. |
|
| ||
|
|
| |||
|
|
|
|
| |
Please wait for the | Camera cannot perform other operations until recording is |
|
|
| |
complete. |
|
|
| ||
camera to finish | – |
| |||
Wait until message clears from display automatically when |
| ||||
recording. |
|
|
| ||
recording is complete. |
|
|
| ||
|
|
|
| ||
|
|
|
|
| |
Memory card is write | – |
| |||
protected. | Slide the |
| |||
|
|
| |||
|
|
|
|
| |
| – | Reference | |||
| Slide the | ||||
|
| ||||
Not available if |
|
|
| ||
|
|
|
|
| |
Error accessing |
|
|
| ||
card is locked. |
|
|
| ||
• Check that the terminal is clean. |
|
| |||
This card cannot be |
| Section | |||
Error accessing memory card. |
| ||||
| • Confirm that memory card is correctly inserted. |
|
| ||
used. | • Use an approved card. |
|
| ||
This card cannot be | • Check that the terminal is clean. |
|
| ||
read. | • Confirm that memory card is correctly inserted. |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
E89