The Basics of Shooting and Playback

Preparation 1 Charge the Battery

1 Connect the power cable in the order indicated below.

Playback and Shooting of Basics The

CHARGE lamp

2 Insert the included battery (Rechargeable Li-ion Battery EN-EL12) into the battery charger by sliding the battery forward (1), and press down until it locks into place (2).

• CHARGE lamp starts flashing when charging starts.

• A fully-exhausted battery charges in about 2 hours and 30 minutes.

•When charging is complete, the CHARGE lamp stops flashing.

•See “Understanding CHARGE Lamp” (A15).

3 When charging is complete, remove the battery, and then unplug the charger.

14