Nikon COOLPIXS1000PJ Projector Slide Show, Press the d button on the camera Projector mode, 142

Projector Slide Show

Project pictures stored in the internal memory or on the memory card as an automated slide show.

1Press the d button on the camera in

projector mode.

The projector menu is displayed on the camera’s monitor.

Projection stops while the projector menu is displayed.

The remote control cannot be used to apply projector mode settings.

2Use the multi selector on the camera to select Start slide show and press the k button.

The monitor turns off and the standby screen is projected.

Select Effects, Background music, or Frame intvl and press the k button to change slide show settings (A 143).

Projector

Start slide show

Effects

Background music

Frame intvl

Exit

Using the projector

142

3Check the camera position and focus with the standby screen.

Follow steps 3 and 4 under “Projecting Pictures” (A 137) to adjust camera position and focus.

Start

Loop

4 Press the H or I button on the remote
control to select Start and press the Q
button.
To repeat the slide show automatically, select Loop
before selecting Start and press the Qbutton. A check	Start
mark (w) will be added to the loop option when
	Loop
enabled.
5 The slide show begins.
While the slide show is in progress, the following
operations can be performed with the remote control.
Press Kto display the subsequent picture or Jto display
the previous picture. Hold down either button to fast
forward or rewind the slide show.
Press the Qbutton to pause the slide show.

During a slide show with Background music, the volume can be adjusted with the g (+) or f (–) button.