Nikon COOLPIXS1000PJ user manual Attaching the Camera Strap, Replacing the Remote Control Battery

Parts of the Camera

Replacing the Remote Control Battery

1

Push the tab in the direction indicated above.

4

Place a new 3V CR2025 lithium battery in the battery holder. Be sure that the “+” mark is facing up.

2	3
Continue pushing the	Remove the used 3V
tab and pull the battery	CR2025 lithium battery.
holder out as indicated
above.
5
Insert the battery holder
into the remote control.

Introduction

Attaching the Camera Strap

1 2 3

The projector stand can be attached to the camera strap.

BNote on the Projector Stand

Do not carry the camera by the projector stand attached to the camera strap. Should the projector stand slip off the camera strap, the camera could fall.

7