❚❚Time

1 Rotate the mode dial to M.

Mode dial

2 Choose the shutter speed.

Rotate the command dial left to choose a shutter speed of “Time” (&).

Command dial

3Open the shutter.

After focusing, press the shutter-release button on the camera or optional remote control, remote cord, or wireless remote controller all the way down.

4Close the shutter.

Repeat the operation performed in Step 3 (shooting ends automatically if the button is not pressed after 30 minutes).

AML-L3 Remote Controls

If you will be using an ML-L3 remote control, select one of the following remote control modes as described on page 70: "(Delayed remote (ML-L3)) or #(Quick-response remote (ML-L3)). Note that if you are using an ML-L3 remote control, pictures will be taken in “Time” mode even when “Bulb”/Ais selected for shutter speed.