❚❚Manual Cleaning

If foreign matter can not be removed from the image sensor using the Clean image sensor option in the setup menu (0 241), the sensor can be cleaned manually as described below. Note, however, that the sensor is extremely delicate and easily damaged. Nikon recommends that the sensor be cleaned only by Nikon-authorized service personnel.

1Charge the battery.

A reliable power source is required when inspecting or cleaning the image sensor. Be sure the battery is fully charged before proceeding.

2Remove the lens.

Turn the camera off and remove the lens.

3 Select Lock mirror up for cleaning.

Turn the camera on and press the G button to display the menus. Highlight Lock mirror up for cleaning in the setup menu

and press 2 (note that this option is not

available at battery levels of Hor below). Gbutton

4Press J.

The message shown at right will be displayed in the monitor.

5Raise the mirror.

Press the shutter-release button all the way down. The mirror will be raised and the shutter curtain will open, revealing the image sensor.

6 Examine the image sensor.

Holding the camera so that light falls on the image sensor, examine the interior of the camera for dust or lint. If no foreign objects are present, proceed to Step 8.

Technical Notes 243