3Insert the battery and memory card.

Insert the battery in the orientation shown, using the battery to keep the orange battery latch pressed to one side. The latch locks the battery in place when the battery is fully inserted.

Battery latch

Slide the memory card in until it clicks into place.

GB 16

AThe Write Protect Switch

SD memory cards are equipped with a write protect switch to prevent accidental loss of data. When this switch is in the “lock” position, the memory card can not be formatted and photos can not be deleted or recorded (a beep will sound if you attempt to release the shutter). To unlock the memory card, slide the switch to the “write” position.

GB 16

Write-protect switch

DMemory Cards

•Memory cards may be hot after use. Observe due caution when removing memory cards from the camera.

•Turn the power off before inserting or removing memory cards. Do not remove memory cards from the camera, turn the camera off, or remove or disconnect the power source during formatting or while data are being recorded, deleted, or copied to a computer. Failure to observe these precautions could result in loss of data or in damage to the camera or card.

•Do not touch the card terminals with your fingers or metal objects.

•Do not bend, drop, or subject to strong physical shocks.

•Do not apply force to the card casing. Failure to observe this precaution could damage the card.

•Do not expose to water, heat, high levels of humidity, or direct sunlight.

•Do not format memory cards in a computer.