Using ViewNX 2

Copy Pictures to the Computer

Before proceeding, be sure you have installed the software on the supplied ViewNX 2 CD (0 151).

1Connect the USB cable.

After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown and then turn the camera on.

AUse a Reliable Power Source

To ensure that data transfer is not interrupted, be sure the camera battery is fully charged.

AConnecting Cables

Be sure the camera is off when connecting or disconnecting interface cables. Do not use force or attempt to insert the connectors at an angle. Close the connector cover when the connector is not in use.

AUSB Hubs

Transfer may not proceed as expected if the camera is connected via a USB hub or keyboard.

2Start Nikon Transfer 2 component of ViewNX 2.

If a message is displayed prompting you to choose a program, select Nikon Transfer 2.

AWindows 7

If the following dialog is displayed, select Nikon Transfer 2 as described below.

1Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Import File using Nikon Transfer 2 and click OK.

2Double-click Import File.

Connections 153