❚❚Terminating the Connection

Wi-Fi can be disabled by:

Selecting Wi-Fi> Network connection > Disable in the camera setup menu

Starting movie recording

Turning the camera off

❚❚Restoring Default Settings

To restore default network settings, select Wi-Fi> Network settings > Reset network settings. A confirmation dialog will be displayed; highlight Yes and press J to restore default network settings.

AThe Wi-Fi Display

While Wi-Fi is enabled, a cicon will flash in the information display. The icon will stop flashing once a connection has been established and the camera is exchanging data with the smart device.

DWi-Fi

Read the warnings on pages xvi to xviii before using the Wi-Fi function. To disable Wi-Fi in settings in which its use is prohibited, select Wi-Fi> Network connection > Disable in the camera setup menu. Note that Eye-Fi cards can not be used while Wi-Fi is enabled and that the standby timer will not turn off while the Wireless Mobile Utility app on the smart device is communicating with the camera. If no data are exchanged for about 5 minutes, the standby timer will turn off. The camera Wi-Fi function is only available when a memory card is inserted and can not be used when a USB or HDMI cable is connected. To prevent loss of power while connected, charge the battery before enabling the network connection.