Eye-Fi Upload

Gbutton Bsetup menu

This option is displayed only when an Eye-Fi memory card (available separately from third-party suppliers) is inserted in the camera. Choose Enable to upload photographs to a preselected destination. Note that pictures will not be uploaded if signal strength is insufficient.

Observe all local laws concerning wireless devices and choose Disable where wireless devices are prohibited.

When an Eye-Fi card is inserted, its status is indicated by an icon in the information display:

d: Eye-Fi upload disabled.

e: Eye-Fi upload enabled but no pictures available for upload.

f(static): Eye-Fi upload enabled; waiting to begin upload.

f(animated): Eye-Fi upload enabled; uploading data.

g: Error.

DEye-Fi Cards

Whether due to errors or other causes, Eye-Fi cards may emit wireless signals when Disable is selected. If a warning is displayed in the monitor (0 256), turn the camera off and remove the card.

The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions. Be sure to keep the card firmware updated. See the documentation provided with the Eye-Fi card for more information; for information on the availability of Eye-Fi cards in your country or region, contact the manufacturer.

AUsing Eye-Fi Cards in Ad Hoc Mode

Additional time may be required when connecting using Eye-Fi cards that support ad hoc mode. Select longer values for Auto off timers > Standby timer in the setup menu (0 186).

 

Conformity Marking

Gbutton Bsetup menu

 

 

 

View the standards with which the camera complies.

 

Firmware Version

Gbutton Bsetup menu

 

 

 

View the current camera firmware version.

204BThe Setup Menu: Camera Setup