WPS (Android Only)
1 Enable the camera’s built-in Wi-Fi.

 

Press the G button to display the menus,

 

then highlight Wi-Fiin the setup menu and

 

press 2. Highlight Network connection

 

and press 2, then highlight Enable and

Gbutton

press J. Wait a few seconds for Wi-Fi to

 

activate.

 

2Connect.

Enable WPS button connections on the camera and smart device:

Camera: Highlight Network settings and press 2.

Highlight Push-button WPS and press 2

to ready the camera for a WPS connection. The camera will wait about two minutes for a WPS connection request from the smart device. To extend the wait time, press J.

Smart device: Select Wi-Fi settings > WPS button connection.3Launch the Wireless Mobile Utility.

Launch the Wireless Mobile Utility on the smart device. The main dialog will be displayed.