Sharing Custom Picture Controls

Custom Picture Controls created using the Picture Control Utility available with ViewNX 2 or optional software such as Capture NX 2 can be copied to a memory card and loaded into the camera, or custom Picture Controls created with the camera can be copied to the memory card to be used in other D7100 cameras and software and then deleted when no longer needed.

To copy custom Picture Controls to or from the

memory card, or to delete custom Picture Controls from the memory card, highlight Load/save in the Manage Picture Control menu and press 2. The

following options will be displayed:

•Copy to camera: Copy custom Picture Controls from the memory card to custom Picture Controls C-1 through C-9 on the camera and name them as desired.

•Delete from card: Delete selected custom Picture Controls from the memory card. The confirmation

dialog shown at right will be displayed before a Picture Control is deleted; to delete the selected Picture Control, highlight Yes and press J.

•Copy to card: Copy a custom Picture Control (C-1 through C-9) from the camera to a selected destination (1 through 99) on the memory card.

J

ASaving Custom Picture Controls

Up to 99 custom Picture Controls can be stored on the memory card at any one time. The memory card can only be used to store user-created custom Picture Controls. The preset Picture Controls supplied with the camera (0 105) can not be copied to the memory card, renamed, or deleted.

The options in the Manage Picture Control menu apply only to the memory card in Slot 1. Custom Picture Controls can not be deleted from or copied to or from the card in Slot 2.

112