sBasic Photography and Playback

Battery Level and Card Capacity

Before shooting, check the battery level and number of exposures remaining.

1 Turn the camera on.

s

Remove the lens cap and turn the camera on.

 

The control panel will turn on and the display in

 

the viewfinder will light.

 

2 Check the battery level.

Check the battery level in the control panel or viewfinder.

 

Control panel

Viewfinder

Description

 

L

Battery fully charged.

 

K

 

 

J

Battery partially discharged.

 

I

 

 

H

d

Low battery. Charge battery or ready spare battery.

 

H

d

Shutter release disabled. Charge or exchange battery.

 

(flashes)

(flashes)

 

 

 

 

 

3 Check the number of exposures remaining.

The control panel and viewfinder show the number of photographs that can be taken at current settings (values over 1000 are rounded down to the nearest hundred; e.g.,

values between 1000 and 1099 are shown as 1.0 K). If two memory cards are inserted, the displays show the space

available on the card in Slot 1 (0 31). When the number of exposures remaining reaches A, the number will flash, nor jwill flash in the shutter-speed displays, and the icon for the affected card will flash. Insert another memory card (0 30) or delete some photos (0 40, 197).

AImage Sensor Cleaning

The camera vibrates the image sensor to remove dust when the camera is turned on or off (0 313).

35