Nikon manual 337

	• Capture NX 2: A complete photo editing package with such advanced editing
	features as selection control points and an auto retouch brush.
	• Camera Control Pro 2: Control the camera remotely from a computer to record
	movies and photographs and save photographs directly to the computer hard
	disk.
Software	Note: Use the latest versions of Nikon software; see the websites listed on page
	xxvi for the latest information on supported operating systems. At default
	settings, Nikon Message Center 2 will periodically check for updates to Nikon
	software and firmware while you are logged in to an account on the computer
	and the computer is connected to the Internet. A message is automatically
	displayed when an update is found.
Body cap	Body Cap BF-1B/Body Cap BF-1A: The body cap keeps the mirror, viewfinder screen,
	and image sensor free of dust when a lens is not in place.
	• Wireless Remote Control ML-L3(0 127): The ML-L3 uses a 3 V CR2025 battery.
	Pressing the battery-chamber latch to the right (q), insert a fingernail into the
	gap and open the battery chamber (w). Ensure that the battery is inserted in
	the correct orientation (r).
	• Wireless Remote Controller WR-R10/WR-T10 (0 130): When a WR-R10 wireless remote
Remote	controller is attached, the camera can be controlled wirelessly using a WR-T10
controls/	wireless remote controller. The WR-T10 uses a 3 V CR2032 battery.
wireless
remote
controllers

Insert a fingernail into the gap behind the battery-chamber latch and open the battery chamber (q). Ensure that the battery is inserted in the correct orientation (e).

•Wireless Remote Controller WR-1 (0 130): WR-1 units are used in groups of two or more, with one functioning as a transmitter and the remaining units acting receivers. The receivers are attached to the accessory terminals of one or more cameras, allowing the transmitter to be used to release the camera shutters or adjust settings remotely.

n

309