Nikon manual 366

	Exposure
	Metering method	• Matrix: 3D color matrix metering II (type G and D lenses); color matrix
			metering II (other CPU lenses); color matrix metering available with
			non-CPU lenses if user provides lens data
		• Center-weighted: Weight of 75% given to 8 mm circle in center of frame.
			Diameter of circle can be changed to 6, 10, or 13 mm, or weighting can
			be based on average of entire frame (non-CPU lenses use 8-mm circle)
		• Spot: Meters 3.5 mm circle (about 2.5% of frame) centered on selected
			focus point (on center focus point when non-CPU lens is used)
	Range (ISO 100, f/1.4	•	Matrix or center-weighted metering: 0–20 EV
	lens, 20 °C/68 °F)	•	Spot metering: 2–20 EV
	Exposure meter	Combined CPU and AI
	coupling
	Mode	Auto modes (iauto; jauto, flash off ); programmed auto with flexible
		program (P); shutter-priority auto (S); aperture-priority auto (A); manual
		(M); scene modes (kportrait; l landscape; pchild; msports; nclose up; onight
		portrait; rnight landscape; sparty/indoor; tbeach/snow; usunset; vdusk/dawn; wpet
		portrait; xcandlelight; yblossom; zautumn colors; 0food); special effects modes
		(%night vision; gcolor sketch; iminiature effect; uselective color; 1silhouette; 2high
		key; 3low key); U1 (user settings 1); U2 (user settings 2)
	Exposure compensation	Can be adjusted by –5 – +5 EV in increments of 1/3 or 1/2 EV in P, S, A, and
		M modes
	Exposure bracketing	2–5 frames in steps of 1/3, 1/2, 2/3, 1, 2, or 3 EV
	Flash bracketing	2–5 frames in steps of 1/3, 1/2, 2/3, 1, 2, or 3 EV
	White balance	2–5 frames in steps of 1, 2, or 3
	bracketing
	ADL bracketing	2 frames using selected value for one frame or 3 frames using preset
		values for all frames
	Exposure lock	Luminosity locked at detected value with AAE-L/AF-Lbutton
	ISO sensitivity	ISO 100 – 6400 in steps of 1/3 or 1/2 EV. Can also be set to approx. 0.3, 0.5,
	(Recommended	0.7, 1, or 2 EV (ISO 25600 equivalent) above ISO 6400; auto ISO sensitivity
	Exposure Index)	control available
	Active D-Lighting	Auto, Extra high, High, Normal, Low, Off
	Focus
	Autofocus	Nikon Advanced Multi-CAM 3500DX autofocus sensor module with TTL
		phase detection, fine-tuning, 51 focus points (including 15 cross-type
		sensors; the center 1 focus point is available at apertures slower than
		f/5.6 and faster than f/8 or at f/8), and AF-assist illuminator (range
		approx. 0.5–3 m/1 ft 8 in.–9 ft 10 in.)
	Detection range	–2 – +19 EV (ISO 100, 20 °C/68 °F)
	Lens servo	•	Autofocus (AF): Single-servo AF (AF-S); continuous-servo AF (AF-C); auto
			AF-S/AF-C selection (AF-A); predictive focus tracking activated
			automatically according to subject status
		• Manual focus (M): Electronic rangefinder can be used
	Focus point	Can be selected from 51 or 11 focus points
n	AF-area mode	Single-point AF; 9-, 21-, or 51-point dynamic-area AF, 3D-tracking,
		auto-area AF

338