b3: Easy Exposure Compensation Gbutton ➜ ACustom Settings menu

This option controls whether the Ebutton is needed to set exposure compensation (0 86). If On (Auto reset) or On is selected, the 0 at the center of the exposure

display will flash even when exposure compensation is set to ±0.

Option

Description

Exposure compensation is set by rotating one of the command dials (see note

below). The setting selected using the command dial is reset when the camera On (Auto reset) turns off or the standby timer expires (exposure compensation settings

selected using the Ebutton are not reset).

As above, except that the exposure compensation value selected using the

On command dial is not reset when the camera turns off or the standby timer expires.

Off

Exposure compensation is set by pressing the Ebutton and rotating the main command dial.

AChange Main/Sub

The dial used to set exposure compensation when On (Auto reset) or On is selected for Custom Setting b3 (Easy exposure compensation) depends on the option selected for Custom Setting f5 (Customize command dials) > Change main/sub (0 257).

Mode

P

S

A

M

Customize command dials > Change main/sub

Off

 

On

Sub-command dial

 

Sub-command dial

Sub-command dial

 

Main command dial

Main command dial

 

Sub-command dial

 

N/A

AShow ISO/Easy ISO

Custom Setting b3 (Easy exposure compensation) can not be used with Custom Setting d3 (ISO display and adjustment) > Show ISO/Easy ISO. Adjustments to either of these items

reset the remaining item; a message is displayed when the item is reset.

U

235