Using ViewNX 2

Copy Pictures to the Computer

Before proceeding, be sure you have installed the software on the supplied ViewNX 2 CD (0 201).

1Choose how pictures will be copied to the computer.

Choose one of the following methods:

•Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the supplied UC-E6 USB cable and then turn the camera on.

AUse a Reliable Power Source

To ensure that data transfer is not interrupted, be sure the camera EN-EL15 battery is fully charged. If in doubt, charge the battery before use or use an EH-5b AC adapter and EP-5B power connector (available separately).

AUSB Hubs

Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.

•SD card slot: If your computer is equipped with an SD card slot, the card can be inserted directly in the slot.

•SD card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the memory card.

2Start Nikon Transfer 2 component of ViewNX 2.

If a message is displayed prompting you to choose a program, select Nikon Transfer 2.

AWindows 7

If the following dialog is displayed, select Nikon Transfer 2 as described below.

1Under Import pictures and videos, click

Change program. A program selection dialog

Q

will be displayed; select Import file using

 

Nikon Transfer 2 and click OK.

 

2Double-click Import file.

203