Macro Mode (Taking Close-up Pictures)

Use macro mode when taking close-up pictures.

1Press the multi selector I(p).

Features Shooting

2 Select ON and press the

 

 

 

Macro mode

 

 

kbutton.

 

•If the setting is not applied by pressing the kbutton within a few seconds, the selection will be canceled.

3 Move the zoom control to set the zoom ratio to a position where F and the zoom indicator are displayed in green.

•When the zoom ratio is set to a position where the zoom indicator is displayed in green, the camera can focus on subjects as close as approximately 10 cm (4 in.) from the lens.

•When the zoom position is at the wide- angle and in the area indicated by 1, the

camera can focus on subjects as close as

 

approximately 1 cm (0.4 in.) from the lens.

1

B Notes About Using the Flash

The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).

C The Macro Mode Setting

•The setting may not be available with some shooting modes (A48).

•If the setting is applied in A(auto) mode, it will remain saved in the camera’s memory even after the camera is turned off.

46