3Press the
halfway.
• When the subject is in focus, the focus area or focus indicator is displayed in green.
• When you are using digital zoom, the camera focuses in the center of the frame and the focus area is not displayed.
•If the focus area or focus indicator flashes,
the camera is unable to focus. Modify the composition and try pressing the shutter- release button halfway again.
1 / 2 5 0 | F 3 |
4Without lifting your finger, press the
of the way down.
B Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing the remaining recording time flashes while images or movies are being saved. Do not open the
C The Auto Off Function
•When no operations are performed for about one minute, the monitor turns off, the camera enters standby mode, and then the
•To turn the monitor back on while the camera is in standby mode, perform an operation such as pressing the power switch or
C When Using a Tripod
•We recommend using a tripod to stabilize the camera in the following situations:
-When the flash is lowered in dark locations or when using a shooting mode in which the flash does not fire
-When the zoom is at a telephoto position
•When using a tripod to stabilize the camera during shooting, set Photo VR to Off in the setup menu (A75) to prevent potential errors caused by this function.
Operations Playback and Shooting Basic
13