Nikon P520 General Camera Setup

General Camera Setup

The Setup Menu

Press the dbutton Mz(setup) tab (A11)

From the menu screen, select the ztab to display the setup menu, and then you can change the following settings.

Set up

Welcome screen Time zone and date Monitor settings Print date Vibration reduction Motion detection AF assist

Option	Description	A
	Set whether or not the welcome screen is displayed
Welcome screen	when power is turned on. The welcome screen image	E64
	can be selected.
	The default setting is None.
	Set settings related to the camera’s date and time. The
	Time zone setting allows you to specify the time zone
	where the camera is mainly used and whether or not
Time zone and date	daylight saving time is in effect. When the xtravel	E65
	destination is set, the camera automatically calculates
	the time difference between the travel destination and
	the whome time zone, and saves images using the
	date and time of the travel destination.
Monitor settings	Set the image display after shooting, the screen
	brightness, and whether or not to display a framing grid or	E67
	histograms on the monitor.
	Imprint the shooting date and time on pictures at the
	time of shooting. The default setting is Off.		General
	Dates cannot be imprinted in the following situations.
	- When the scene mode is set to Easy panorama,
Print date	Panorama assist or 3D photography	E68	Camera
	fps or Continuous H: 60 fps is selected for
	- When Pre-shooting cache, Continuous H: 120
	Continuous (A68)		Setup
	- During movie recording

103