Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

You can shoot pictures with a flash by raising the flash. You can set a flash mode that suits the shooting conditions.

1Press the m(flash pop-up) button to raise the

flash.

• When the flash is lowered, flash operation is disabled and Sis displayed.

Features Shooting

2Press H(mflash mode) on the multi selector.

3 Use the multi selector to select the desired mode and press the kbutton.

• See “Available Flash Modes” (A57) for more information.

•If the kbutton is not pressed within a few seconds,

the selection will be canceled.

Auto

•When U(auto) is applied, Dis only displayed for

a few seconds even if monitor indicators (A9) are turned on.

4Frame the subject and take a picture.

• The flash lamp indicates the status of the flash when the shutter-release button is pressed halfway.

- On:

The flash will fire when you press the

 

shutter-release button all the way.

- Flashing: The flash is charging. The camera cannot take pictures.

- Off:

The flash will not fire when a picture is

 

taken.

•If the battery is low, the monitor will be turned off while the flash is charging.

56