Nikon COOLPIXP520BLK, P520 Red, P520 Black Connecting the Camera to a Printer Direct Print, E19

Connecting the Camera to a Printer (Direct Print)

Users of PictBridge-compatible (F22) printers can connect the camera directly to the printer and print pictures without using a computer.

Connecting the Camera to a Printer

1Turn off the camera.

2Turn on the printer.

• Check the printer settings.

3Connect the camera to the printer using the included USB cable.

•Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull the plug at an angle.

4The camera is automatically turned on.

•When connected correctly, the PictBridge startup screen (1) is displayed on the monitor screen of the camera. Then the Print selection screen (2) is displayed.

Print selection

15/05

2013

NO. 32 32

BIf the PictBridge Startup Screen Is Not Displayed

Turn the camera off and disconnect the USB cable. Set the Charge by computer option (E76) in the camera’s setup menu to Off and reconnect the cable.

BNotes on Power Source

•When connecting the camera to a printer, use a fully charged battery to prevent the camera from turning off unexpectedly.

•If the AC Adapter EH-62A (available separately) (E92) is used, the COOLPIX P520 can be powered from an electrical outlet. Do not, under any circumstances, use an AC adapter other than the EH-62A. Failure to observe this precaution could result in overheating or damage to the camera.

Reference Section

E19