Nikon 26397, P520 Red, P520 Black, COOLPIXP520BLK manual Flash Exp. Comp, Noise Reduction Filter, E45

Shooting Menu (j, k, l or m Mode)

Flash Exp. Comp.

Rotate the mode dial to j, k, l, m or M Mdbutton Mj, k, l, m or M tab (A10) MFlash exp. comp.

Flash exp. comp. option is used to adjust the flash output.

Use this option when the flash is too bright or too dark.

Option	Description
+0.3 to +2.0	The flash output is increased from +0.3 to +2.0 EV, in increments of 1/3
	EV, to make the main subject of the frame appear brighter.
0.0 (default	The flash output is not adjusted.
setting)
-0.3 to -2.0	The flash output is reduced from –0.3 to –2.0 EV, in increments of 1/3
	EV, to prevent unwanted highlights or reflections.

The icon for the current setting other than 0.0 is displayed on the monitor (A12).

Noise Reduction Filter

Rotate the mode dial to j, k, l, m or M Mdbutton Mj, k, l, m or M tab (A10) MNoise reduction filter

Set the strength of the noise reduction function that is normally performed when recording the picture.

	Option	Description
e	High	Perform noise reduction at a level higher than the standard
		strength.
M	Normal (default	Perform noise reduction at the standard strength.
	setting)
l	Low	Perform noise reduction at a level lower than the standard
		strength.

Noise reduction filter setting can be confirmed on the monitor when recording a picture (A12).

Reference Section

E45