Nikon COOLPIXP520BLK, P520 Red, P520 Black, 26397 manual Playback Issues, F12

Troubleshooting

Playback Issues

	Problem		Cause/Solution	A
		• File was overwritten or renamed by computer or another		–
	File cannot be	•	make or model of camera.
			File cannot be played back during interval timer shooting.	68
	played back.
		• Movies recorded with cameras other than the COOLPIX P520		92
			cannot be played back.
	Cannot play a	• Pictures shot continuously with cameras other than the		–
			COOLPIX P520 cannot be played as a sequence.
	sequence.
		• Check the Sequence display options setting.		85, E58
		• Playback zoom cannot be used with movies, small pictures, or		–
		•	cropped copies of size 320 × 240 pixels or smaller.
	Cannot zoom in on		Playback zoom may not be available for pictures taken with	–
	picture.		cameras other than the COOLPIX P520.
		• 3D images cannot be enlarged when the camera is connected		45
			via HDMI and they are played back in 3D.
	Cannot record or	• Voice memos cannot be attached to movies.		97
		• Voice memos cannot be attached to pictures taken with		85
	play back voice
			cameras other than the COOLPIX P520, and voice memos
	memo.
			recorded by other cameras cannot be played back.
	Pictures and	• Confirm the conditions that are required for editing pictures or		85, E11,
			movies.	E24
	movies cannot be
		• Pictures and movies taken with cameras other than the		–
	edited.
			COOLPIX P520 cannot be edited.
		• Video mode or HDMI is not correctly set in the TV settings		105,
	Pictures are not	•	setup menu.	E75
Technical			HDMI output is disabled when the camera is connected to	87
	displayed on	•	either a computer or printer with a USB cable.
	television.		Memory card contains no pictures. Replace memory card.	20
			Remove memory card to play back pictures from internal
Notes			memory.
		•	Camera is off.	23
and		•	Battery is exhausted.	22
	Nikon Transfer 2	•	USB cable is not correctly connected.	87
Index	when camera is	•	Confirm that the operating system used is compatible with	88
	does not start	•	Camera is not recognized by the computer.	–
	connected to a	•	the camera.
	computer.		Computer is not set to launch Nikon Transfer 2 automatically.	91
			For more information on Nikon Transfer 2, refer to help
			information contained in ViewNX 2.
	The PictBridge	With some PictBridge-compatible printers, the PictBridge startup
	startup screen is
		screen may not be displayed and it may be impossible to print
	not displayed
		images when Auto is selected for the Charge by computer		105, E76
	when the camera
		option. Set the Charge by computer option to Off and
	is connected to a
		reconnect the camera to the printer.
	printer.

F12