Nikon P520 Black, P520 Red, 26397 104, Setup Menu, Conditions, set Vibration reduction to Active

The Setup Menu

	Option	Description	A
		Reduce blurring caused by camera shake when
		shooting. The default setting is Normal.
		• If a comparatively large camera shake is likely to occur
		when shooting from a car or under poor foothold
		conditions, set Vibration reduction to Active.
	Vibration reduction	• When using a tripod to stabilize the camera, set this	E69
		feature to Off to prevent this feature from
		malfunctioning.
		• If this feature is assigned to the w(function) button
		using Fn button, its setting menu can be also
		displayed on the screen by pressing the w
		(function) button during shooting (A71).
		When the camera detects camera shake or subject
		movement at the time of shooting, it automatically
		increases ISO sensitivity and shutter speed to reduce
		blurring. The default setting is Off.
	Motion detection	The rindicator lights in green when the camera	E70
		detects camera shake or subject movement and
		increases shutter speed.
		• When using certain shooting modes or settings,
		motion is not detected. In this case the rindicator is
		not displayed.
		When set to Auto (default setting), the AF-assist
		illuminator (A30) lights if shooting in dark
	AF assist	surroundings to help the camera focus.	E71
		• Even if Auto is selected, the AF-assist illuminator may
		not light depending on the position of the focus area
		or the scene mode that is selected.
		When set to On (default setting), rotating and holding
		the zoom control toward g(i) triggers the digital
	Digital zoom	zoom (A29) if the optical zoom is at the maximum	E71
General		telephoto zoom position.
		• The digital zoom cannot be used simultaneously in
		certain settings such as shooting mode.
Camera
	Assign side zoom	Select the function to be performed during shooting
		when the side zoom control is rotated. When set to	E72
	control	Zoom (default setting), the zoom control operation is
Setup		enabled.
		Turn various camera sounds on and off. In the default
	Sound settings	setting, beep sounds are on.	E73
		• The operation sound is disabled in certain settings
		such as shooting mode.
	Auto off	Set the amount of time that passes before the monitor	E73
		is turned off to save power. The default setting is 1 min.

104