Nikon P520 Red, P520 Black, COOLPIXP520BLK, 26397 manual E62, To Erase Log Data

GPS Options Menu

BNotes on Log Recording

•If the date and time are not set, the log cannot be recorded.

•Use a fully charged battery to prevent the camera from turning off during log recording. When the battery power becomes exhausted, log recording ends.

•Log recording ends due to the operations below even when there is time remaining for log recording.

-The USB cable is connected.

-Insert a memory card.

-The battery is removed.

-Record GPS data in GPS options is set to Off (same as when Reset all is performed).

-The setting of the internal clock (time zone or date and time) is changed.

•Even when the camera is turned off, log recording is continuously performed until the preset time has elapsed if there is still time remaining for log recording.

•The log data is temporarily stored in the camera. New logs cannot be recorded if the log data remains in the camera. After recording log data, save it to a memory card.

•See “GPS Log Data Saved on Memory Cards” (E91) for more information.

CTo Erase Log Data

•To erase the log data that is temporarily stored in the camera, select Erase log in step 4.

•To erase the log data that is stored on the memory card, press the lbutton in View log (E63).

Reference Section

E62