Nikon P520 Black, P520 Red, 26397 manual Auto or Fixed range auto is selected, Target finding AF A79

Features That Can Be Set Using the d(Menu) Button (Shooting Mode)

Option	Description	A
	Higher ISO sensitivity allows you to take pictures of darker
	subjects. Additionally, even with subjects of similar
	brightness, pictures can be taken at faster shutter speeds,
ISO sensitivity 1	and blurring caused by camera shake and subject
	movement can be reduced. When ISO sensitivity is set to	E38
	Auto (default setting), the camera sets the ISO sensitivity
	automatically.
	• In m (Manual) mode, ISO sensitivity is fixed at ISO 80 if
	Auto or Fixed range auto is selected.
Exposure	The exposure (brightness) can be changed automatically	E39
bracketing	during continuous shooting. The default setting is Off.
	Set how the camera determines the focus area using the
AF area mode 1	autofocus to Face priority (A80), Auto, Manual,	E40
	Center (normal), Center (wide), Subject tracking or
	Target finding AF (A79).
			Shooting
	When Single AF (default setting) is selected, the camera
	focuses only while the shutter-release button is pressed
Autofocus mode	halfway. When Full-time AF is selected, the camera	E44
	focuses even when the shutter-release button is not		Features
	pressed halfway. You may hear the sound of the camera
	focusing.
Flash exp. comp.	Adjust the flash output. Use this option when the flash is	E45
	too bright or too dark. The default setting is 0.0.
Noise reduction	Set the strength of the noise reduction function that is	E45
	normally performed when recording the picture. The
filter
	default setting is Normal.
Active D-Lighting	Prevent loss of contrast details in highlights and shadows	E46
	when shooting images. The default setting is Off.
Save user settings	The current settings are stored in mode dial M (A53).	53
Reset user settings	The settings saved to mode dial M are reset.	54
	If the zoom control is operated when set to On, the camera
	changes in steps to the focal length (equivalent to 35mm
	[135] format of angle of view) of the zoom lens that is set in
Zoom memory	advance. The default setting is Off.	E47
	• Select On and press the kbutton to display the screen
	for focal length selection. Press the kbutton to switch
	the On [w]/Off setting, then press the multi selector K
	to apply the selection.
Startup zoom	When the camera is turned on, the zoom position moves
	to the focal length (equivalent to 35mm [135] format of	E47
position 2	angle of view) of the zoom lens that is set in advance. The
	default setting is 24 mm.

69