Nikon 26397 Motion Detection, E70, Reduction burst in Close-up,Fireworks show, Easy, Monochrome

Reference Section

The Setup Menu

Motion Detection

Press the dbutton Mztab (A10) MMotion detection

Enable motion detection to reduce the effects of camera shake and subject movement when shooting still pictures.

	Option	Description
		If the camera detects the movement of the subject or camera
		shake, the ISO sensitivity is raised and the shutter speed is
		increased to reduce their effects.
		However, motion detection does not function in the following
		situations.
U	Auto	• When the flash fires
		• In the following scene modes: X (Night landscape), c
	(default setting)
		(Landscape), R (Backlighting), Sports, Night portrait, Noise
		reduction burst in Close-up,Fireworks show, Easy
		panorama in Panorama, Pet portrait, 3D photography
		• When u(special effects) is set to High ISO
		monochrome
		• When shooting mode is j, k, l, m or M
k Off		Motion detection is not enabled.

When Auto is selected, an icon for this setting is displayed on the monitor (A12). The motion detection icon lights in green when the camera detects any vibration and increases the shutter speed.

BNotes on Motion Detection

•Motion detection may be unable to completely reduce effects of camera shake and subject movement in some situations.

•Motion detection may not function if the subject exhibits significant movement or is too dark.

•The pictures taken may become grainy.

E70