Nikon P520 Red manual Characteristics of Each Scene, Changing Scene Mode Settings, Night landscape

Scene Mode (Shooting Suited to Scenes)

Changing Scene Mode Settings

•Features That Can Be Set Using the Multi Selector ➝ A55

•Features That Can Be Set Using the d(Menu) Button

-Changing the Image Quality and Image Size ➝ A72

-Setup menu ➝ A103

Characteristics of Each Scene

•Use of a tripod is recommended in scene modes with Oindicated due to slow shutter speed.

•Set Vibration reduction in the setup menu (A103) to Off when using a tripod to stabilize the camera.

•For scene modes that use the flash, be sure to press the m(flash pop-up) button to raise the flash before shooting (A56).

X Night landscape

•Press the dbutton to select YHand-held or ZTripod in Night landscape.

•YHand-held(default setting): This enables you to shoot with the minimum of camera shake and noise even when holding the camera by hand.

-When the shutter-release button is pressed all the way, pictures are shot continuously, and the camera combines these pictures to save a single picture.

-Once the shutter-release button is pressed all the way, hold the camera steady without moving it until a still picture is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.

-The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen on the monitor at the time of shooting.

•ZTripod: Select this mode when the camera is stabilized, such as with a tripod.

-Vibration reduction is not used even if Vibration reduction in the setup menu (A103) is set to Normal or Active.

-Press the shutter-release button all the way to shoot a single picture at a slow shutter speed.

•When the shutter-release button is pressed halfway, the camera adjusts the focus to infinity. The focus area or focus indicator (A12) always lights in green.

Shooting Features

37