Projector the Using

Displaying Pictures with the Projector

CAuto Off with Projection

When no operations are performed during projection, the camera ends projection to save power and enter standby mode, and the power-on lamp blinks. If another three minutes passes in standby mode, the camera turns off.

•While the power-on lamp is blinking, press the buttons indicated below to resume projection in playback mode.

- The power switch, shutter-release button, or cbutton

•If the camera turns off, close the projector cover. Also, make sure to close the projector cover before turning the camera back on again.

•The time allowed to pass before the camera enters standby mode when no operations are performed during projection can be changed from Auto off in Set up (A98).

CProjection Distance and Projected Picture Size

Projection distance

Projected picture size

26 cm (10 in.)

Approx. 10 × 7.5 cm (4 × 3 in.; equivalent to 5-inch display)

50 cm (1 ft 7 in.)

Approx. 20 × 15 cm (8 × 6 in.; equivalent to 10-inch display)

1.0 m (3 ft 3 in.)

Approx. 40 × 30 cm (16 × 12 in.; equivalent to 20-inch display)

1.5 m (4 ft 11 in.)

Approx. 60 × 45 cm (24 × 18 in.; equivalent to 30-inch display)

2.0 m (6 ft 6 in.)

Approx. 80 × 60 cm (32 × 24 in.; equivalent to 40-inch display)

2.5 m (8 ft 2 in.)

Approx. 100 × 75 cm (39 × 30 in.; equivalent to 50-inch display)

3.1 m (10 ft)

Approx. 120 × 90 cm (47 × 35 in.; equivalent to 60-inch display)

 

 

CPC-PJ Transfer

•The PC-PJ Transfer software allows you to use the camera’s built-in projector to project a computer display via a USB connection.

•PC-PJ Transfer can be installed by using the included PC-PJ Transfer CD.

•See “Projecting the Computer Display” (E29) for more information about installation or using PC-PJ Transfer.

CProjector Input Connector

•When the projector input connector (A2) on the COOLPIX S1200pj is connected to the Apple iPhone4 or iPhone3GS using the Dock Connector Cable, still pictures and movies saved on the Apple device can be viewed with the camera’s built-in projector.

•For information on the Dock Connector Cable, contact your nearest authorized Nikon distributor. Please note that the Dock Connector Cable may not be readily available in some countries or regions.

•Do not connect a cable other than the Dock Connector Cable to the camera’s projector input connector. Connecting a different cable may cause the camera to malfunction.

82