Projector the Using

Displaying Pictures with the Projector

bProjecting Slide Shows

Project pictures stored in the internal memory or on the memory card as an automated slide show.

The operations described below can be performed using the camera or the remote control (available separately) (A 4).

1Turn on the camera, and open the projector cover.

Use favorite pictures mode, auto sort mode, or list by date mode when you want to be more specific about which pictures to project.

2Press the dbutton.

The playback menu is displayed.

3Use Hor Iof the multi selector or the remote control to select Slide show, and press the k(apply selection) button.

To change the slide show settings when the projector is in operation, select Slide show, and then select Effects, Background music or Frame intvl, and press the k button (E51).

4Check the camera position and focus with the standby screen.

Follow steps 3 and 4 under “Displaying Pictures with the Projector” (A80) to adjust camera position and focus.

5 Use Hor Ito select Start and press the k(apply selection) button.

If you start without applying slide show settings in step 3, the slide show begins with the previously made settings.

You can start the slide show without projecting the menu screen (steps 2 to 3) by pressing the bbutton on the remote control while in full-frame playback mode or thumbnail playback mode.

6The slide show begins.

While the slide show is in progress, press the Kbutton on the camera or the remote control to display the next picture or the J button to display the previous picture. Hold down the button to advance or rewind the slide show.

During a slide show with Background music, the volume can be adjusted by rotating the zoom control on the camera, or by pressing the zoom buttons on the remote control.

To pause the slide show, press the k(apply selection) button.

86