Using ViewNX 2

Transferring Images to the Computer

When transferring pictures to the computer from the camera, select the Interface setting (A 100) from the setup menu (A 98) and set the USB option to MTP/ PTP (default setting).

1Choose how images will be copied to the computer.

Choose one of the following methods:

•Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the supplied USB Cable UC-E6. The camera automatically turns on.

•SD card slot: If your computer is equipped with an SD card slot, the card can be inserted directly in the slot.

•SD card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the memory card.

If a message is displayed prompting you to choose a program, select Nikon Transfer 2.

•When using Windows 7

If the dialog shown at right is displayed, follow the steps below to select

Nikon Transfer 2.

1 Under Import pictures and videos, click Change program. A program selection dialog will be

displayed; select Import File using Nikon Transfer 2 and click OK.

2 Double-click Import File.

If the memory card contains a large number of images, it may take a while for Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.

BConnecting the USB Cable

The connection may not be recognized if the camera is connected to the computer via a USB hub.

75