Section Reference

The Setup Menu

Sound Settings

dbutton Mz tab MSound settings

Adjust the following sound settings.

Option

Description

 

 

Select On (default setting) or Off. When On is selected, a beep will sound once when operations are completed successfully,

Button soundtwice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Select On (default setting) or Off. No sound is played with

Shutter soundshutter release when some features such as continuous shooting or BSS (best shot selector) are enabled, or recording

movies, even if On is selected.

BNotes on Sound Settings

•In Pet portrait scene mode, button and shutter sounds are disabled.

•The button sound is not generated when the projector is in operation.

Auto Off

dbutton Mz tab MAuto off

When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A23) to save power. In this option, set the time allowed to elapse before the camera enters standby mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.

CWhen the Monitor Turns off for the Power Saving Function

•Power-on lamp blinks in standby mode.

•Camera turns off after three minutes passes in standby mode.

•To reactivate the monitor while the power on lamp is blinking, press any of the following buttons: - Power switch, shutter-release button, A button, cbutton or b(emovie-record) button

•See “Auto Off with Projection” (A82) for more information.

CAuto Off Settings

The time allowed to elapse before the camera enters standby mode is fixed in the following situations:

•When a menu is displayed: three minutes

•During slide show playback: up to 60 minutes (when using the Rechargeable Li-ion Battery EN-EL12)

•When the AC adapter EH-62F is connected: 30 minutes

E70