Nikon S1200pj manual 217

Troubleshooting

Problem		Cause/Solution	A
	• The desired picture was sorted to a category		70, E7
		other than the category currently displayed.
	• Pictures recorded by a camera other than the		70, E8,
		COOLPIX S1200pj and pictures copied using	E57
		the copy option cannot be displayed in auto
The recorded pictures are	•	sort mode.
not displayed in auto sort		Pictures recorded in internal memory or on	–
mode.		the memory card may not be played back
		correctly if overwritten by a computer.
	• Up to 999 pictures and movie files can be		70, E8
		added to each category. If the desired
		category already contains 999 pictures, new
		pictures or movies cannot be added.
	• Select the Interface setting from the setup		75, 100,
		menu and set the USB option to MTP/PTP,	E73
	•	and try to connect the camera again.
		Camera is off.	23
Nikon Transfer 2 does not	•	Battery is exhausted.	22
	• USB cable is not properly connected.		72
start when camera is
	• Camera is not recognized by the computer.		–
connected.
	•	Confirm system requirements.	73
	• Computer is not set to start Nikon Transfer 2		73
		automatically. For more information on
		Nikon Transfer 2, refer to help information
		contained in ViewNX 2.
	• Select the Interface setting from the setup		100, E23,
screen is not displayed		menu and set the USB option to MTP/PTP,	E73	Technical
		and try to connect the camera again.
The PictBridge startup	• With some PictBridge-compatible printers,		72, E73
		the PictBridge startup screen may not be
when the camera is		displayed and it may be impossible to print		Notes
		pictures when Auto is selected for the
connected to a printer.
		Charge by computer option in the setup
				and
		menu. Set the Charge by computer option
		printer.		Index
		to Off and reconnect the camera to the
	• Memory card contains no pictures. Replace
Pictures to be printed are	•	the memory card.	20
not displayed.		Remove the memory card to print pictures
		from the internal memory.

F13