2.3

Insert the battery

Insert a fully-charged EN-EL1 or new 2CR5 (DL245) battery as shown in the label on the underside of the battery-chamber cover. The power-on lamp will light briefly when the battery is inserted.

EN-EL1

2CR5

EN-EL12CR5(DL245)

Introduction— First Steps

2.4

Close the battery-chamber cover

Close the battery chamber cover (1) and slide the latch to the closed position (; 2). To prevent the battery being dislodged during operation, be sure that the battery-cham- ber cover is properly latched.

1

2

The Clock Battery

The camera’s internal clock-calendar is powered by a separate, rechargeable power source, which is charged as necessary when the main battery is in- stalled or the camera powered by an AC adapter (available separately). After charging for about ten hours, this power source can provide roughly three days of back-up power. If the main battery has been removed for an ex- tended period, or removed before charging is complete, a flashing icon may appear in the monitor, indicating that the clock needs to be reset.

11

Page 21
Image 21
Nikon S2H05000501 manual Clock Battery, Close the battery-chamber cover