2 Connect the camera and computer

Connect the UC-E1 USB cable as shown below. Use the flat connector for connection to the computer, and connect the other end of the cable to the camera’s USB connector. Do not connect the camera via a USB hub or keyboard.

ISO

3 Turn the camera on

Turn the camera on. Nikon View 5 will detect the camera and start automatically. For details, see the Nikon View 5 Reference Manual (on CD). While the UC-E1 USB cable is connected, the camera monitor will remain off, and all controls except the power switch will be inactive.

Connections— Connecting to

a Computer

Before Connecting the Camera

Be sure to install Nikon View 5 before connecting your camera.

Use a Reliable Power Source

When transferring data between the camera and the computer, be sure that the battery is fully charged. If in doubt, recharge the battery before begin- ning transfer or use the optional EH-21 AC adapter/battery charger or EH-53 AC adapter.

35

Page 45
Image 45
Nikon S2H05000501 manual Before Connecting the Camera, Use a Reliable Power Source