10
The Basics of Shooting and Playback
The Basics of Shooting and Playback

Preparation 1 Insert the Batteries

The camera has a dual-cover system. Underneath the battery-chamber/memory card slot
cover is an internal cover.
1Open the battery-chamber/
memory card slot cover and
then the internal cover.
Before opening the covers, hold the
camera upside down to prevent the
batteries from falling out.
2Insert the batteries.
Confirm that the positive (+) and negative (–) terminals are
oriented correctly as described on the label at the entrance
of the battery chamber, and insert the batteries.
3Close the internal cover and
then the battery-chamber/
memory card slot cover.
While pushing down on the batteries
with the internal cover, slide the
cover toward the center of the
camera. Pushing the cover without
sliding it may damage the camera.
1
2
3
4
5
1
2
3
4