Turning the Camera On and Off

When the camera is turned on, the power-on lamp (green) will light and then the monitor will turn on (the power-on lamp turns off when the monitor turns on).

To turn off the camera, press the power switch. When the camera turns off, the power-on lamp and the display turn off.

Press and hold the c(shooting/playback mode) button to turn on the camera and switch to playback mode.

C Power Saving Function (Auto Off)

If no operations are performed for about three minutes, the monitor will turn off, the camera will enter standby mode, and the power-on lamp will flash. If no operations are performed for approximately another three minutes, the camera will turn off automatically.

While the camera is in standby mode, the monitor turns back on if you perform any of the following operations:

Press the power switch, shutter-release button, c(shooting/playback mode) button, or b(emovie-record) button

The camera will enter standby mode within 30 minutes while playing a slide show.

 

 

Flashes

 

No operations

No operations

 

performed

performed

780

3 min

3 min

15m 0s

The Basics of Shooting and Playback

Camera enters

Camera turns off.

standby mode.

19

 

Page 45
Image 45
Nikon 26317 Turning the Camera On and Off, Power Saving Function Auto Off, Basics of Shooting and Playback Camera enters